Need Support? Let’s guide you to the right answer or agent.

OpenPlant Ideas Portal

ADD A NEW IDEA

All ideas

Showing 347

Individual Hatch shadings in 2D extraction

I saw a request to create individual raceway 2D extraction hatches/pattern to visualize different system, variants or voltage level in different way.
almost 3 years ago in Bentley Raceway and Cable Management 0 Future consideration

2D Extraction overwrites hatches related to Voltage Level

I saw a request to visualize the raceway 2D extraction with different Hatches related to voltage level.
almost 3 years ago in Bentley Raceway and Cable Management 0 Future consideration

Turn New Component Dialog into and App or CHM

One thing that can be hard to find for new admins is what dimensional information is needed for each different component type. The information shown in the 'Add New Component Dialog' is a great tool and really needs to be it's own app or chm. Last...
almost 3 years ago in OpenPlant Project Administrator 0 Future consideration

To use Conduit generation Logic for 3D cable generation

BRCM 3D cable has many visualization issues: Weird crossings, overlaps, at divided raceway. Unusual bends at virtual connections Twisted together untidily at Bends Very small bend, or sometimes very large bend. These issues causes weird visualizat...
over 3 years ago in Bentley Raceway and Cable Management 1 Will not implement

Delete selection of 3D cable out of Cable Manager

In a possible workflow it will be possible to delete the cable route of cable(s) on same cable possibly exist a 3D cable visualization. The cable length in cable manager will still show the length of 3D cable. A useful tool inside Cable Manager wi...
over 3 years ago in Bentley Raceway and Cable Management 0 Planned

Preference settings in Raceway Offset

It will be useful to enable the selection of specific fitting settings like it is enabled in the Raceway router in the Preferences to change in case the Raceway Offset shall use other settings.
over 3 years ago in Bentley Raceway and Cable Management 0 Future consideration

Report to show raceway parts without RW-ID

User request, I guess useful: A report to show all raceway parts without an RW-ID, maybe with coordinate to find it or with a picture to show the raceway part in the drawing like it show in the Detail_Cable_Route_List_IV
over 3 years ago in Bentley Raceway and Cable Management 0 Future consideration

Place assembly as a group with a report

We have the option to place an created assembly as individual components or as an complete assembly. Some customer want to create schedules/reports over placed assemblies and the referring components. Requirements Add option when inserting assembl...
over 3 years ago in OpenPlant PID 0 Future consideration

We need 3-Way components under 45 Degrees. Control valves , valves and Fittings

Placing a 3 Way Valve with third Way under 45 Degrees should be possible . Same should be possible for 3-Way Fittings ( Y-Strainer). Example see attached pictures. Needed for different customers. They as well add valves directly to the third way, ...
over 3 years ago in OpenPlant PID 2 Planned

Support/Bracket placement related to used raceway and cable weight

Saw this request from multiple users, last was Schneider UK. It will be good to have a possible automatic placement of hanger and support to a single or multiple raceway systems related to the calculation of cable weight and also the weight of the...
almost 4 years ago in Bentley Raceway and Cable Management 0 Future consideration