Need Support? Let’s guide you to the right answer or agent.

OpenPlant Ideas Portal

ADD A NEW IDEA

All ideas

Showing 313 of 313

Control Over Flow Arrow Size

We need to be able to control the scale of the flow arrow so it can be placed on small section of pipe. ATM is places it out in space if the section is too small.
about 2 years ago in OpenPlant Modeler 0 Future consideration

Be able to create EHT (Electrical Heat Trace) Isometrics from OpenPlant

The drafters would make a copy of piping isometric line work, scale them to fit the EHT isometric title block, and then manually add the EHT layout/Power connection/RTD location. The EHT isometric may span across multiple piping isometrics and lin...
about 1 year ago in OpenPlant Isometrics Manager 3 Future consideration

Untagged Parametric Instrument bubble

In general User needs sometimes untagged ( components without unique identifier). Example instrument bubbles with the same behavior than the existing ones but without any sequence number. Example PLC Entry Points. See attached document.
over 3 years ago in OpenPlant PID 1 Future consideration

Leader line for pipeline annotations

possibility to draw leader lines for pipeline annotations if there is no space on the line.
over 3 years ago in OpenPlant PID 0 Future consideration

Valve Reporting for Connected Different Pipelines

Hi, We have requirement of valve reporting, where valve is connected to two different pipelines. Meaning, CP1 of valve is connected to pipeline A and CP2 of valve is connected to different pipeline B. Whenever, valve report is extracted it should ...
about 1 year ago in OpenPlant PID 0 Future consideration

Y-Strainer: Show Orientation of Branch (Blow Off / Drain)

Y-Strainer: Show Orientation of Branch (Blow Off / Drain). Please see attached image.
about 1 year ago in OpenPlant Isometrics Manager 0 Future consideration

Y-Strainer: Dimension to intersection of Main Line and Branch Point

Y-Strainer: Dimension to intersection of Main Line and Branch. Consider the properties, DESIGN_LENGTH_CENTER_TO_OUTLET_END + DESIGN_LENGTH_CENTER_TO_RUN_END = LENGTH
about 1 year ago in OpenPlant Isometrics Manager 0 Future consideration

Query data from iTwin and include in isometric drawing

We can use DB_QUERY to populate titleblock information from line lists that are stored in Excel or relational database. It would be nice to be able to use iTwin as a source and query these properties directly from iTwin with ECSQL as we are moving...
over 2 years ago in OpenPlant Isometrics Manager 1 Future consideration

Icons for different type of Instruments

While selecting an instrument from the generic option in the piping galleries we get all the instruments listed and then we need to select the required one to place in the model, instead if we have icon for the instruments for example Level switch...
about 1 year ago in OpenPlant Modeler 0 Future consideration

Copy a project/models/P&IDs and assign different WBS

Note: Although this is categorized under OPPA, this is applicable to all applications under OpenPlant suite. --------------------------------------------------------------------------------------------------- There are instances when user wants to...
over 3 years ago in OpenPlant Project Administrator 0 Future consideration