Switch to turn on/off the Refresh Routing Model command
When working with a large model and needing to route large groups of cables in succession it would be nice to be able to turn off the automatic refresh of the routing model so that it's possible to manually route cables and not have to wait for th...
Ability to filter cables in Cable Manager according to a specific Raceway Segment ID
Would like the ability to add the Raceway Segment ID as a column in the Cable Manager and filter on this field to only display cables that were routed through this Raceway segment.
Ability to search/select tray based on tray properties
We need the ability to Query Trays – ability to search/select tray based on tray properties (voltage level, tray number, tray material, tray with cover, etc.) Right now filter in cable manager can be used to search for some raceway properties but ...
Ability to visualize the routing model by applying routing filters
Would like the ability in the Cable Manager to visualize the routing model filtered on the defined routing filters to only display specific voltage levels like CTRL for example so that I can more easily focus on the information I am interested in.
Enable the Cable Manager's Visualize command to highlight the generated 3D cable
If a 3D cable is already generated and we select a cable in the Cable Manager and Visualize it, the software should highlight the 3D cable in the routing model along with the raceways that the cable passes through.
Would like a new cable laying method to support Bolt Clamps.
Need a way of routing cables and supporting them with bolt clamps that can be visualized with the 3D cables running through the clamps. This kind of cable laying method is needed for ladders and c profile rails. It should deliver also the number a...
Users are required to enter hostname:datasource for Bentley IMS login to work. Specifically, if the Datasource Name and Display Name are not the same. This is not an issue for all other Bentley products, but OPIM requires users to manually add the...
E365 User (Tetratech) looking forward to utilize both option coordinates and rotation using variable IE_PLANTNORTH present in style.cfg file. in case there is no option to support here - then we can introduce new variable to allow user to rotate i...
Make position of equipment tags relative to the equipment selectable
It would be helpful if it was possible to select the position of the tags for an equipment, as "above, below, left, right", in the Equipment Manager, and that should be editable in the Equipment Properties for already placed equipment.