Need Support? Let’s guide you to the right answer or agent.

OpenPlant Ideas Portal

ADD A NEW IDEA

All ideas

Showing 357 of 357

Change Raceway ID in tag

It will be useful to enable the direct edit of raceway IDs in the file, e.g. using the Edit Text command as it work in the Equipment ID and to save this information to the raceways and update in the Raceway IDs dialog.
about 4 years ago in Bentley Raceway and Cable Management 0 Future consideration

Avoid raceway overfill in manual routing

Would like the option of having the software check raceway fills when manually routing cables through raceway systems in the Cable Manager and alert the user if the fill will be exceeded.
over 1 year ago in Bentley Raceway and Cable Management 0 Future consideration

Perform raceway size calculation using all possible routed cable

It would be helpful if the software had an option to route all cables ignoring fill and then recommend a raceway size to accommodate the required number of cables.
over 1 year ago in Bentley Raceway and Cable Management 0 Future consideration

Would like a multiplier for routed cable lengths

Would like to be able to specify a multiplier that would affect the length calculation of routed cables. For example, specify that cables should be 110% of the length calculated with current methods. It may be necessary to do this on a per voltage...
over 1 year ago in Bentley Raceway and Cable Management 0 Future consideration

Add Modify Element to Isometrics Workflow

With Modify Element you can adjust dimensions without loosing association leader line to element. Hence this is not just a MS-functionality but an important tool when post-processing isometrics and should be integrated into isometric workflow by d...
about 4 years ago in OpenPlant Isometrics Manager 0 Future consideration

Add schedule report to OPM

I would like to suggest an addition to Open Plant Modeler functionality, similar to Open Building Design. That is an option to create a schedule report, containing component attributes with the option to alter, apply and save them. Changes also ap...
over 3 years ago in OpenPlant Modeler 0 Future consideration

Would like a new cable laying method to support Bolt Clamps.

Need a way of routing cables and supporting them with bolt clamps that can be visualized with the 3D cables running through the clamps. This kind of cable laying method is needed for ladders and c profile rails. It should deliver also the number a...
over 1 year ago in Bentley Raceway and Cable Management 0 Future consideration

Would like raceway and equipment tags to support Plant Breakdown Structures like KKS

It would be helpful if raceway and equipment tags could be comprised of multiple properties like the Plant Breakdown Structure in OpenPlant to support these types of tagging conventions including KKS.
over 1 year ago in Bentley Raceway and Cable Management 0 Future consideration

Enforceable, Spec drive for P&ID

Add the ability to enfor spec drive in P&ID, or at minmum the ability to live warn a user that they are placing items that are not found in the active spec, or are not from the same spec as the line the component is being placed on.
10 months ago in OpenPlant PID 0 Future consideration

Better Graphics for Tappings

Please can you improve the graphics of tappings/unreinforced and reinforced branches to be more graphically correct. At the moment, especially on large pipe sizes where connections are not tee in, the graphics of the connecting pipe stop short of ...
over 1 year ago in OpenPlant Modeler 2 Future consideration